Street¶
Terrain toolbar (AR) / Extras (ME) | |
Extras menu > Terrain (AR) / Extras menu > Special functions > Terrain (ME) |
The "Street" function prompts you either to draw a contour or to select an existing polygon, depending on which Entry mode is selected. The definition contour is used as a centre line.
This contour must meet the following requirements:
- The contour is open
- The contour is uninterrupted
- The contour lies in a level parallel to the floor X/Y-plane
- The contour should contain no curves/recesses which are too narrow (due to slopes)
The following dialog window appears.
Name¶
Improved · 16 R1 · Improvements
A free name can be assigned here.
Width (W):¶
Width of the street
Inclination angle (C):¶
Upward slope angle
Descent angle (A):¶
Downward slope angle
Colour mode/material mode¶
The colours or material can be entered separately for the sides and floor.
This switch allows you to toggle between colour mode and material mode. For more details, see the Colours and Materials chapters.
Tip
The street's height gradient is based on the line's endpoints and the contour's arcs. The height value from the terrain to these points is determined and the heights in between are equally interpolated. If you want to specify the heights exactly, then you should lay the desired street point on a terrain edge.