Skip to content

Lay-out Piping Network

Three-line

Icon1 Drainage property bar

The function is used to generate the pipes and shaped parts according to the preceding settings. The pipes and shaped parts are generated in 3D and 2D. A generated and edited piping network (one-line 3D) is required for the three-line. The 3D line (one-line) then remains.

Explanation

A piping network's pipes and shaped parts always create a specific object. These can be deleted and regenerated at any time.

To generate:

  • An elbow pipe: this is generated for every change in direction.
  • A double elbow pipe (2 x 45°): this is generated by a drawn right-angled piping shape.
  • A tee and a 45° elbow pipe: these are generated by tee piping connected at right angles.
  • A reduction: this is generated between piping with different dimensions.
  • An elbow pipe and a pipe: these are generated by raised/lowered load points.
Explanation

To modify a piping network, the pipes and shaped parts must first be deleted (they form an object). The 3D line (one-line) is then maintained.
Once modified, the slope calculation must be refreshed before the three-line can be regenerated.

Tip

A piping network or part of it can also be stretched. The shaped parts must also first be deleted. Once stretched, the slope calculation must be refreshed before the three-line can be regenerated.